Exhaust device VU-160 / above the support

Placement – ​​above the support (bracket). Exhaust device: Diameter of air ducts – 160 mm, max. working radius zones - 2 meters / 3 m / 4 m Purpose The exhaust device is designed to capture and remove various types of smoke and dust, as well as the like. harmful substances released during welding work. The exhaust device can capture contaminated air at a height exceeding the height of its installation. The exhaust device is used as part of an exhaust ventilation system, and can also be connected directly to an individual fan or to an air filter. The temperature of the transported air should not exceed +70 degrees C. Design The exhaust device has a hollow structure, which ensures maintenance of a high level of air flow without turbulence, eliminates the accumulation of dirt particles and reduces pressure losses. The exhaust device consists of: rigid and flexible air ducts, outside of which there is a support mechanism; a mounting bracket with a rotary coupling and a mounting flange, which allow you to secure the device itself, install an individual fan or connect an air duct; a round air intake funnel (D=350mm), which can rotate at an angle of up to 90 degrees from the axis in the horizontal and vertical plane. The levers are made of sheet steel and painted with high quality powder paint. Flexible connections are made of PVC. To regulate air flow, the exhaust device is equipped with a damper