PB-2 stove "Potbelly stove"

The stove “Potbelly stove” model PB-2 from UHL-MASH is a modern heating equipment. It is intended for a steam room in a sauna or bathhouse. The all-metal structure on legs is easy to install, which allows you to choose the most suitable cladding option (red or fireclay brick). The walls of the stove, which is heated with wood, quickly heat up and transfer heat to the brick “jacket”. To purchase the “Potbelly stove” PB-2, contact the specialists of UHL-MASH. Advantages of a potbelly stove for baths The operation of a wood-burning stove is based on convection, which increases the temperature of the steam room quickly and evenly. Preparing the steam room takes about an hour. One fill of fuel is enough for 6 hours, which is enough for a full “bath day”. The thick-walled metal combustion chamber has a long service life. The thickest part of the firebox is the door, and to avoid its deformation, it is not recommended to heat the stove excessively. If desired, a water boiler is installed on the potbelly stove, which will immediately provide hot water. The design of the PB-2 oven includes: a door; valve; chimney pipe; support legs; combustion chamber. A sauna stove made of metal heats up quickly. Do not touch it during operation. Usually a brick shell is laid around the stove, which absorbs the heat. A firebox with legs allows you to place masonry not only around, but also underneath, in order to heat a large area of ​​stones. A tightly fitting door with a latch prevents coal from accidentally getting out. Air flows through the holes in the door. To buy a PB-2 potbelly stove, contact the UHL-MASH manager by email or through the feedback form. If you have any questions, please contact the phone numbers listed on the website.