Categories
Brands
Wood splitter 380 V

Wood splitter 380 V

SellerArtmash
Brand:Artmash
Product Code: ДКПР-380
SKU : DKPR-380
Product available in stock : 1 Lead time : 10 days Contact with the seller
  • 68200.00₴

You cannot order more than what is available.

Max. diameter of the log to be chopped: 500 mm

Max. length of the log to be chopped: 600 mm

(customized up to 800mm)

Force created: 12 pulling force

Dimensions: L2200*W1200*H1200 mm

Weight:  250 kg

Motor capacity: 2.2 kW


The electromechanical rack splitter with an engine power of 2.2 kW is an in-house development of the LLC Artmash enterprise. Such a machine is indispensable for the preparation of firewood on a large scale. It operates on a voltage of 380 V. The wood splitter can be used both in industry and in private households.



Features of a wood splitter 380 V, 2.2 kW

This firewood chopping machine is characterized by increased reliability and maximum efficiency. In addition, the price of rack log splitters in the markets of Ukraine and abroad is lower than for hydraulic models. The equipment is a rather complicated design, but working on such a machine is not difficult. The weight of the wood splitter is 250 kg.

The advantages of an inexpensive rack and pinion machine compared to hydraulics:

  1. The model can process absolutely any wood up to 600 mm long and up to 500 mm in diameter. At the enterprise LLC Artmash, it is possible to custom-make a design for splitting firewood up to 800 mm long.
  2. A 2.2 kW, 1,500 revolutions rack splitter using a gearbox and flywheels (2 flywheels weighing 80 kg) produces a log force of about 12 tons.
  3. The main components (rack and pinion) are made of 18KhGT steel, followed by heat treatment (surface hardening). All types of work: from the creation of equipment to commissioning, are held at the enterprise LLC Artmash.
  4. The productivity of the model for harvesting wood per shift is 20 m³ and higher for one operator. High split speed (1.5 seconds) is suitable for processing large volumes of firewood.

Unlike the hydraulic model, the electromechanical rack and pinion machine does not require expensive and complicated repairs. If necessary, you can order the necessary parts for a rack splitter from the manufacturer from those available in the warehouse and arrange delivery to your region.

The principle of operation of a wood splitter 380 V, 2.2 kW

Before putting the machine into operation, it is tested and checked for defects. The design can work around the clock.

To start, you must:

  1. Connect the plug to the outlet and press the start button.
  2. Set the wood horizontally on the desktop.
  3. Use the lever to actuate the pusher.

Moving along the rails, the pusher directs the log to a sharp knife and in a matter of seconds splits wood of any breed.

The warranty on this machine is 24 months. There is also after-sales service. You can buy a rack splitter with high performance and at the cost of the manufacturer by contacting the managers by phone.

* Attention. Product description can be obtained by machine translation.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Note: HTML is not translated!
Captcha