Universal thermal resistance furnace from the manufacturer Ltd. "Bortek".
Package includes: Electric furnace СНО-2.4.2/11 И2, spare heater, passports and operating instructions for the electric furnace and temperature controller. It is possible to delivery of welded pallet of heat-resistant steel, 3 mm thick.
Terms of delivery: The manufacturing time is 30 working days from the moment of an advance payment of 50%. Acceptance of the finished electric furnace takes place on the territory of the Contractor.
Shipment: after 100% payment. Bortek Ltd. provides loading and customs clearance of cargo for export.
Warranty: Warranty (within 12 months) and post-warranty service is provided. We provide technical support, supply components, upgrade and update the technical characteristics of equipment, major repairs.
| № | Specifications | СНО-2.4.2/11 И2 |
|---|
| 1 | Heating Type | Electricity |
| 2 | Heating element | Spiral |
| 3 | Rated power, kW | 4,5 |
4 | Power supply | 220 V, 50 Hz |
5 | Maximum temperature in the working space, ºС | 1100 |
| 6 | Range of automatic temperature control, ºС | 40...1100 |
| 7 | Digital temperature controller / Type of thermocouple | ТРП-08-ТП (by default) / ТХА |
| 8 | Stability of the temperature control in the steady thermal conditions, without loading, ºС | ± 3 |
| 9 | Side heaters | И2 - heaters covered with ceramic tiles inside the workspace |
| 10 | Dimensions of working space, length × width × height, mm | 200 (W) × 400 (L) × 200 (H) |
| 11 | Atmosphere in the working space | Air |
| 12 | Volume of the working chamber, l | 16 |
| 13 | Existence of the welded pallet from heat resisting steel | by agreement with the Customer |
| 14 | Overall dimensions, length × width × heiht, mm, no more | 550 (W) × 720 (L) × 550 (H) |
| 15 | Estimated Weight, kg, not more than | 100
|
Technical description: Laboratory electric furnace СНО-2.4.2/11 И2 is equipped with an automatic temperature control system based on solid-state non-contact relays and a microprocessor-based programmable temperature controller that sets the temperature, time to reach the mode and time spent on the mode. It is possible to install a temperature controller with access to a computer and/or implementing complex heat treatment modes (up to 12 steps “heating - shelf”). The control panel is located at the bottom of the furnace. Heaters are installed on the tubes in the slots of the side walls of the furnace and in the hearth. The furnace is lined with modern energy-saving microporous and fibrous materials. Ceramic tiles are placed in the bottom. There are inlet and outlet air vents with stoppers to remove possible gas emissions during heat treatment.
* Attention. Product description can be obtained by machine translation.
-760x1000.jpg "Muffle furnace for heat treatment of metals, ceramic calcination, laboratory tests and research up to 1100°C (200x400x200 mm). Model: СНО-2.4.2/11 И2, Bortek")
-760x1000.jpg "Muffle furnace for heat treatment of metals, ceramic calcination, laboratory tests and research up to 1100°C (200x400x200 mm). Model: СНО-2.4.2/11 И2, Bortek")
-760x1000.jpg "Muffle furnace for heat treatment of metals, ceramic calcination, laboratory tests and research up to 1100°C (200x400x200 mm). Model: СНО-2.4.2/11 И2, Bortek")
-760x1000.jpg "Muffle furnace for heat treatment of metals, ceramic calcination, laboratory tests and research up to 1100°C (200x400x200 mm). Model: СНО-2.4.2/11 И2, Bortek")
-760x1000.jpg "Muffle furnace for heat treatment of metals, ceramic calcination, laboratory tests and research up to 1100°C (200x400x200 mm). Model: СНО-2.4.2/11 И2, Bortek")
-760x1000.jpg "Muffle furnace for heat treatment of metals, ceramic calcination, laboratory tests and research up to 1100°C (200x400x200 mm). Model: СНО-2.4.2/11 И2, Bortek")
