Heating mat Zubr DC Mat 640 W

Purpose The ZUBR DC Mat double-core heating mat is intended for installation not only in screed, but also in tile adhesive, which is convenient when it is not possible to raise the height of the floor. The specific power of the ZUBR mat is 160 W/m², which ensures perfect comfort and uniform distribution of heat over the entire surface of the floor. ZUBR heating mats can be used as an additional heating system. Finishing coatings to which the ZUBR heating mat is suitable: ceramic tiles, porcelain stoneware, natural stone; laminate, provided that the temperature of the warm floor is not higher than 27 °C. The laminate must have the appropriate certificates and manufacturer's marks, which inform about the purpose of the product for use with an electric warm floor. Design features of the ZUBR DC Mat The ZUBR heating mat consists of a heating cable fixed with high-strength tape on a self-adhesive fiberglass reinforcing mesh. Due to the fixation of the heating cable on the grid, the need to select the laying step is eliminated, which reduces the possibility of its damage during installation. The distance between turns of the heating cable on the reinforcing mesh of the mat is optimal for uniform, comfortable heating and is 9 cm. The cable and the "cold" end are hermetically connected through a coupling. Inside the coupling, the two heating cores and the screen are clearly fixed in place thanks to a special dielectric insulator. 1. Both cores in the cable are heating. Both heating veins allow to evenly distribute the temperature and ensure longer operation of the heated floor. 2. Double layer FEP (fluoroethylene propylene) and HDPE (high density polyethylene) insulation. Double-layer insulation on each core reliably protects the cable when bending during installation. Separate insulation of each heating core allows them to move freely inside the wire, ensuring the durability of the structure. 3. Screen (two galvanized copper wires + aluminum and PET foil) 4. Outer shell made of cross-linked XLPE polyethylene, 0.5 mm thick. The outer insulation is of a strictly uniform thickness, due to which there are no thin places along the entire length of the cable, which ensures uniform heating.