Categories
Brands
Filling and capping lines for liquid and viscous products (from the manufacturer)

Filling and capping lines for liquid and viscous products (from the manufacturer)

SellerООО "ТД "Таврияпромсервис"
Brand:ООО "ТД "Таврияпромсервис"
Product Code: Линии розлива и укупорки жидких и вязких продуктов (от производителя)
SKU : 69002934
Availability: By request
Contact with the seller
  • Price on request

You cannot order more than what is available.

PURPOSE: For automatic filling of liquid and viscous masses for food and non-food purposes into various containers of cylindrical and other shapes with a volume of 0.3 l to 10.0 l, as well as subsequent capping with a lid by twisting or slamming. It is possible to connect the machine to a CIP-washing station or to manufacture a machine with a quick dismantling design if a more thorough cleaning of the dosing system is required. Productivity of lines is 1000-3000 bottles/hour. ARE USED WHEN POTTING THESE PRODUCTS: Milk, kefir, fermented baked milk, yoghurt (including those with inclusions up to 5 mm3). Mayonnaise, ketchups, sauces. Sunflower oil. Condensed milk, toppings, syrups, confectionery fillers. Drinking water, drinks, compotes, juices (including hot filling). Liquid soaps, shampoos, cosmetics and pharmaceuticals. Household chemicals, auto chemicals, disinfectants, various non-edible oils. Other products. ADVANTAGES: Allow to reduce the dosing error to 0.2%. The dose of the product is not regulated mechanically, but by changing the parameters on the touch control panel, which greatly simplifies the work of the operator, and also makes it possible to more accurately adjust the dose (almost steplessly); Dosing occurs in a uniform flow, without jerks, which prevents the product from foaming, as well as its splashing out of the filling container; The ability to adjust the piston speed on the touch screen will allow you to choose the optimal flow rate of the product during filling. Ability to create and save dosing regimens; No need for some replacement parts to change to a different dose. The bottom of the machine in which there are power and electrical cabinets, as well as kinematics, are covered with stainless steel sheet. Convenient access for visual inspection and maintenance is possible through large doors located on all sides of the machine. The upper part of the machine, where the filling zone is located, is closed on all sides with special plexiglass. This makes it possible to exclude the ingress of foreign substances into the product at all stages of the operation of the machine, and also ensures a high level of safety for the operator. For more information about this offer, follow the link OUR CONTACTS: Kherson, st. 9th Vostochnaya, 5 tel.: +38 (067) 552-1110 tel.: +38 (067) 553-1402 where the filling zone is located, is closed on all sides by special plexiglass. This makes it possible to exclude the ingress of foreign substances into the product at all stages of the operation of the machine, and also ensures a high level of safety for the operator. For more information about this offer, follow the link OUR CONTACTS: Kherson, st. 9th Vostochnaya, 5 tel.: +38 (067) 552-1110 tel.: +38 (067) 553-1402 where the filling zone is located, is closed on all sides by special plexiglass. This makes it possible to exclude the ingress of foreign substances into the product at all stages of the operation of the machine, and also ensures a high level of safety for the operator. For more information about this offer, follow the link OUR CONTACTS: Kherson, st. 9th Vostochnaya, 5 tel.: +38 (067) 552-1110 tel.: +38 (067) 553-1402 sales@tavrproms.com www.tavrproms.com YouTube
* Attention. Product description can be obtained by machine translation.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Note: HTML is not translated!
Captcha