SCREW CONVEYOR + MIXER
Seller | Artmash |
Brand: | Artmash |
Product Code: | ShTP-ZK-1 |
SKU : | ShTPZK1 |
-
2,637.00€
You can request a product via the "Contact with the seller" form.
Seller | Artmash |
Brand: | Artmash |
Product Code: | ShTP-ZK-1 |
SKU : | ShTPZK1 |
You can request a product via the "Contact with the seller" form.
Model: ShTP-ZK-0,6, ShTP-ZK-1
Voltage: 400 V
Yield capacity: up to 3000 kg/h
Mixing capacity: up to 1000 kg/h
Feed screw motor power: 0.55 kW
Mixer motor power: 2.2 kW
Hopper capacity: 0.6 cubic meters
Dimensions: 2800*750*1600 mm
Weight: 220 kg
Fine loading auger + mixer - universal equipment developed by the designers of Artmash LLC. By purchasing this model, you save on the purchase of 2 separate units. The model is often used as the basis of feed complexes (mini-lines) for small and medium-sized farms.
380 | The model is only suitable for three-phase mains (380 V). |
0,6-1 | The volume of the bunker is 0.6 cubic meters. m. This is enough to work even with a 22 kW granulator, but under the order we will increase the capacity of the bunker to 1 cubic meter. m. |
300 | The mass of the product is impressive, but reliable swivel wheels help to roll the auger-mixer alone across the territory without much effort. |
40/40 | There is a time relay in the automation cabinet. This allows the operator to set any period for the revolutions of the auger in the left and right directions. Practice shows that 40 seconds is enough to scroll to the right, after which the reverse is automatically turned on and the motor turns the auger in the left direction for 40 seconds. |
5-6 | As well as a full-size mixer, the universal model allows for 5-6 minutes to qualitatively mix the raw materials together with various additives until homogeneous and start feeding to the granulator to proceed to the pelletizing process. |
2,2 | The agitator inside the hopper is connected through a chain drive with a worm gear motor with a power of 2.2 kW. This is necessary to increase torque and reduce speed. |
0,55 | The dosing auger (inside the pipe) is powered by a motor with a 0.55 kW geared motor with a gear ratio of 1/50. Installed air-cooled engine. |
After receiving the product with a gearmotor, we recommend unscrewing the bolt that is at the top and screwing in a grease fitting instead for further maintenance of the gearbox. A package with a grease fitting is attached to the gearmotor.
The equipment is available at the manufacturer's price, with or without MPE (according to the client's request).
Ensures stable operation of the granulator motor | |
There is no need to continuously pour raw materials into the granulator. The load on the motor is reduced, which prevents the motor from overheating and increases its service life. | |
Facilitates the work of the operator | |
There is no need to continuously manually add raw materials to the granulator, as well as prepare batches using artisanal methods. | |
Takes up minimal space in the workshop | |
Thanks to the combination of two functions in one design, there is more free space for the work of personnel. The delivery of such equipment is also much cheaper than the transportation of separate screw and mixer. | |
Adjusts to raw materials | |
Under the mixer hopper there is a gate control knob that changes the intensity of spilling the mixed product onto the feed auger. For compound feed, the gate can be opened halfway, as it has greater flowability. And for sawdust, straw, alfalfa, open the gate completely. The feed rate of raw materials to the granulator is controlled by changing the speed of rotation of the feeding auger on the control panel of the equipment. |
To buy an exact loading auger - a mixer at the manufacturer's price, as well as spare parts for it, please contact our phone managers or leave a request.